Calibration

Calibration

Airflite’s metrology laboratory can serve the calibration needs of wider industry. Airflite places a high importance on the accuracy of measuring equipment, and can calibrate valuable measuring equipment using qualified and skilled metrologists.

Management, control and calibration services for entire suites of equipment is offered by Airflite, with rapid turnaround and free Door-to-Door item pick-up and express delivery within the Perth Metropolitan area.

Items are calibrated to National Standards and returned with a certified measurement of uncertainty.

Airflite’s Electrical and Infrared Metrology Laboratories are ISO/IEC 17025 accredited by National Association of Testing Authorities under Certificate (NATA) No. 18436 and can calibrate the following items:

Electrical:

  • Multi-function installation testers
  • Portable appliance testers
  • Insulation resistance testers
  • Continuity testers
  • Earth (ground) testers
  • Loop/line impedance testers
  • Residual current device (RCD) testers
  • Ground bond testers
  • Leakage current testers
  • Voltmeters
  • Multimeters

 

Infrared:

  • Infrared thermometers
  • Infrared thermal imagers

Items that Airflite can calibrate to National Standards include:

  • Dimensional
  • Internal and external micrometers
  • Steel rules
  • Vernier calipers
  • Height gauges
  • Measuring tapes
  • Pressure
  • Pressure gauges
  • Pressure relief valves
  • Pressure switches
  • Pressure transducers
  • Vacuum gauges
  • Manometers
  • Pressure calibrators
  • Pressure controllers
  • Pressure indicators
  • Torque
  • Beam-type torque wrenches
  • Click-type torque wrenches
  • Electronic torque wrenches
  • Aircraft Cable Tensiometers

Airflite can carry out calibrations in the following fields of test:

ELECTRICAL – NATA ACCREDITED to AS ISO/IEC 170250

Verification and adjustment in accordance with manufacturer’s specifications can be performed for the following:

  • Digital and analogue multimeters
  • Insulation testers
  • RCD / RCCB testers
  • Loop/Line testers
  • Clamp meters
  • Decade resistance boxes
  • Multi-function testers
  • Portable appliance testers
  • Process meters
  • Process calibrators – electrical only
  • Milli-Amp calibrators
  • Phase rotation indicators
  • Power supplies
  • Earth / Ground resistance meters
  • Continuity testers

TEMPERATURE

Verification in accordance with manufacturer’s specifications:

  • Thermocouple thermometers

Verification in accordance with manufacturer’s specifications

At 0°C and 35°C to 500°C

  • Infrared thermometers
  • Infrared thermal imagers

PRESSURE

Verification and adjustment in accordance with AS1349-1986, MSA Test Methods 1 & 2

-80kPa to 70 MPa

  • Pressure gauges
  • Pressure indicators
  • Pressure loggers
  • Pressure transducers

TORQUE

Verification and adjustment in accordance with AS4115-1993

To 1500 N.m

  • Torque wrenches
  • Torque screwdrivers

DIMENSIONAL

  • External micrometers up to 50mm/2in – Verification in accordance with AS2102-1989
  • External vernier and digital Callipers up to 300mm/12in – Verification in accordance with AS1984-1977
  • Dial indicators up to 25mm/1in – Verification in accordance with AS2103-1978

MASS

Verification in accordance with manufacturer’s specifications

To 100kg

  • Spring balances
  • Scales

AIRCRAFT CABLE TENSIOMETERS

Verification in accordance with T5 Series SOP-TN-001

To 200 lb

  • 1/16” cable
  • 3/32” cable
  • 1/8” cable
  • 5/32” cable
  • 3/16” cable

CRIMPING TOOLS

Verification in accordance with manufacturer’s specifications.

STOPWATCHES

Verification in accordance with MSL Technical Guide 8.

NON-CONTACT TACHOMETERS

Verification in accordance with manufacturer’s specifications.

To 100,000 RPM.

ULTRASONIC UNDERWATER LOCATING BEACON (ULB) TESTERS

Verification in accordance with manufacturer’s specifications.

Comments are closed.